A number of analyses, meta-analyses, and assessments, including those performed by the Intergovernmental Panel on Climate Change, the National Oceanic and Atmospheric Administration, the National Renewable Energy Laboratory, and the International Energy Agency, have concluded that deployment of a diverse portfolio of clean energy technologies makes a transition to a low-carbon-emission energy system both more feasible and less costly than other pathways. In contrast, Jacobson et al. [Jacobson MZ, Delucchi MA, Cameron MA, Frew BA (2015) Proc Natl Acad Sci USA 112(49): 15060-15065] argue that it is feasible to provide "low-cost solutions to the grid reliability problem with 100% penetration of WWS [wind, water and solar power] across all energy sectors in the continental United States between 2050 and 2055", with only electricity and hydrogen as energy carriers. In this paper, we evaluate that study and find significant shortcomings in the analysis. In particular, we point out that this work used invalid modeling tools, contained modeling errors, and made implausible and inadequately supported assumptions. Policy makers should treat with caution any visions of a rapid, reliable, and low-cost transition to entire energy systems that relies almost exclusively on wind, solar, and hydroelectric power.

Clean energy technologies that cost more than fossil fuel technologies require support through research and development (R & D). Learning-by-doing relates historical cost decreases to accumulation of experience. A learning investment is the amount of subsidy that is required to reach cost parity between a new technology and a conventional technology. We use learning investments to compare the relative impacts of two stylized types of R & D. We define curve-following R & D to be R & D that lowers costs by producing knowledge that would have otherwise been gained through learning-by-doing. We define curve-shifting R & D to be R & D that lowers costs by producing innovations that would not have occurred through learning-by-doing. We show that if an equal investment in curve-following or curve-shifting R & D would produce the same reduction in cost, the curve shifting R & D would be more effective at reducing the learning investment needed to make the technology competitive. The relative benefit of curve-shifting over curve-following R & D is greater with a high starting cost and low learning rate. Our analysis suggests that, other things equal, investments in curve-shifting R & D have large benefits relative to curve-following R & D. In setting research policy, governments should consider the greater benefits of cost reductions brought about by transformational rather than incremental change.

Wind turbines continuously remove kinetic energy from the lower troposphere, thereby reducing the wind speed near hub height. The rate of electricity generation in large wind farms containing multiple wind arrays is, therefore, constrained by the rate of kinetic energy replenishment from the atmosphere above. In recent years, a growing body of research argues that the rate of generated power is limited to around 1.5 W m(-2) within large wind farms. However, in this study, we show that considerably higher power generation rates may be sustainable over some open ocean areas. In particular, the North Atlantic is identified as a region where the downward transport of kinetic energy may sustain extraction rates of 6 W m(-2) and above over large areas in the annual mean. Furthermore, our results indicate that the surface heat flux from the oceans to the atmosphere may play an important role in creating regions where sustained high rates of downward transport of kinetic energy and thus, high rates of kinetic energy extraction may be geophysical possible. While no commercial-scale deep water wind farms yet exist, our results suggest that such technologies, if they became technically and economically feasible, could potentially provide civilizationscale power.

Climate models provide the principal means of projecting global warming over the remainder of the twenty-first century but modelled estimates of warming vary by a factor of approximately two even under the same radiative forcing scenarios. Across-model relationships between currently observable attributes of the climate system and the simulated magnitude of future warming have the potential to inform projections. Here we show that robust across-model relationships exist between the global spatial patterns of several fundamental attributes of Earth's top-of-atmosphere energy budget and the magnitude of projected global warming. When we constrain the model projections with observations, we obtain greater means and narrower ranges of future global warming across the major radiative forcing scenarios, in general. In particular, we find that the observationally informed warming projection for the end of the twenty-first century for the steepest radiative forcing scenario is about 15 per cent warmer (+0.5 degrees Celsius) with a reduction of about a third in the two-standard-deviation spread (-1.2 degrees Celsius) relative to the raw model projections reported by the Intergovernmental Panel on Climate Change. Our results suggest that achieving any given global temperature stabilization target will require steeper greenhouse gas emissions reductions than previously calculated.

The six largest known impact craters of the last 250 Myr (>= 70 km in diameter), which are capable of causing significant environmental damage, coincide with four times of recognized extinction events at 36 (with 2 craters), 66, and 145 Myr ago, and possibly with two provisional extinction events at 168 and 215 Myr ago. These impact cratering events are accompanied by layers in the geologic record interpreted as impact ejecta. Chance occurrences of impacts and extinctions can be rejected at confidence levels of 99.96% (for 4 impact/extinctions) to 99.99% (for 6 impact/extinctions). These results argue that several extinction events over the last 250 Myr may be related to the effects of large-body impacts. (C) 2017, China University of Geosciences (Beijing) and Peking University. Production and hosting by Elsevier B.V.

Solar geoengineering has been proposed as a backup plan to offset some aspects of anthropogenic climate change if timely CO2 emission reductions fail to materialize. Modeling studies have shown that there are trade-offs between changes in temperature and hydrological cycle in response to solar geoengineering. Here we investigate the possibility of stabilizing both global mean temperature and precipitation simultaneously by combining two geoengineering approaches: stratospheric sulfate aerosol increase (SAI) that deflects sunlight to space and cirrus cloud thinning (CCT) that enables more longwave radiation to escape to space. Using the slab ocean configuration of National Center for Atmospheric Research Community Earth System Model, we simulate SAI by uniformly adding sulfate aerosol in the upper stratosphere and CCT by uniformly increasing cirrus cloud ice particle falling speed. Under an idealized warming scenario of abrupt quadrupling of atmospheric CO2, we show that by combining appropriate amounts of SAI and CCT geoengineering, global mean (or land mean) temperature and precipitation can be restored simultaneously to preindustrial levels. However, compared to SAI, cocktail geoengineering by mixing SAI and CCT does not markedly improve the overall similarity between geoengineered climate and preindustrial climate on regional scales. Some optimal spatially nonuniform mixture of SAI with CCT might have the potential to better mitigate climate change at both the global and regional scales.

Worldwide, coral reef ecosystems are experiencing increasing pressure from a variety of anthropogenic perturbations including ocean warming and acidification, increased sedimentation, eutrophication, and overfishing, which could shift reefs to a condition of net calcium carbonate (CaCO3) dissolution and erosion. Herein, we determine the net calcification potential and the relative balance of net organic carbon metabolism (net community production; NCP) and net inorganic carbon metabolism (net community calcification; NCC) within 23 coral reef locations across the globe. In light of these results, we consider the suitability of using these two metrics developed from total alkalinity (TA) and dissolved inorganic carbon (DIC) measurements collected on different spatiotemporal scales to monitor coral reef biogeochemistry under anthropogenic change. All reefs in this study were net calcifying for the majority of observations as inferred from alkalinity depletion relative to offshore, although occasional observations of net dissolution occurred at most locations. However, reefs with lower net calcification potential (i.e., lower TA depletion) could shift towards net dissolution sooner than reefs with a higher potential. The percent influence of organic carbon fluxes on total changes in dissolved inorganic carbon (DIC) (i.e., NCP compared to the sum of NCP and NCC) ranged from 32% to 88% and reflected inherent biogeochemical differences between reefs. Reefs with the largest relative percentage of NCP experienced the largest variability in seawater pH for a given change in DIC, which is directly related to the reefs ability to elevate or suppress local pH relative to the open ocean. This work highlights the value of measuring coral reef carbonate chemistry when evaluating their susceptibility to ongoing global environmental change and offers a baseline from which to guide future conservation efforts aimed at preserving these valuable ecosystems.

We analyze 36 years of global, hourly weather data (1980-2015) to quantify the covariability of solar and wind resources as a function of time and location, over multi-decadal time scales and up to continental length scales. Assuming minimal excess generation, lossless transmission, and no other generation sources, the analysis indicates that wind-heavy or solar-heavy U.S.-scale power generation portfolios could in principle provide similar to 80% of recent total annual U.S. electricity demand. However, to reliably meet 100% of total annual electricity demand, seasonal cycles and unpredictable weather events require several weeks' worth of energy storage and/or the installation of much more capacity of solar and wind power than is routinely necessary to meet peak demand. To obtain similar to 80% reliability, solar-heavy wind/solar generation mixes require sufficient energy storage to overcome the daily solar cycle, whereas wind-heavy wind/solar generation mixes require continental-scale transmission to exploit the geographic diversity of wind. Policy and planning aimed at providing a reliable electricity supply must therefore rigorously consider constraints associated with the geophysical variability of the solar and wind resourc-even over continental scales.

Some energy services and industrial processes-such as long-distance freight transport, air travel, highly reliable electricity, and steel and cement manufacturing-are particularly difficult to provide without adding carbon dioxide (CO2) to the atmosphere. Rapidly growing demand for these services, combined with long lead times for technology development and long lifetimes of energy infrastructure, make decarbonization of these services both essential and urgent. We examine barriers and opportunities associated with these difficult-to-decarbonize services and processes, including possible technological solutions and research and development priorities. A range of existing technologies could meet future demands for these services and processes without net addition of CO2 to the atmosphere, but their use may depend on a combination of cost reductions via research and innovation, as well as coordinated deployment and integration of operations across currently discrete energy industries.