The efficiency of heat transfer by conduction in the Earth's core controls the dynamics of convection and limits the power available for the geodynamo. We have measured the room temperature electrical resistivity of iron and iron-silicon alloy to 60 GPa and present a new model of the resistivity at high pressures and temperatures relevant to the Earth's core. The model is compared with available shock wave data and theoretical studies. For a power law and linear temperature dependence of electrical resistivity, the calculated thermal conductivity at the core-mantle boundary is similar to 67-145W/m/K for pure Fe and similar to 41-60 W/m/K for Fe-9wt % Si. Impurities in the core have a strong effect on the transport properties of iron that could significantly impact core thermal models. The models describing the data indicate higher thermal conductivity at core pressure than previously suggested, requiring additional energy sources in the past to operate the geodynamo.

An initial observation of the formation of WH under pressure from W gaskets surrounding hydrogen in diamond anvil cells led to a theoretical study of tungsten hydride phases. At P = 1 atm no stoichiometry is found to be stable with respect to separation into the elements, but as the pressure is raised WHn (n = 1-6, 8) stoichiometries are metastable or stable. WH and WH4 are calculated to be stable at P > 15 GPa, WH2 becomes stable at P > 100 GPa and WH6 at P > 150 GPa. In agreement with experiment, the structure computed for WH is anti-NiAs. WH2 shares with WH a hexagonal arrangement of tungsten atoms, with hydrogen atoms occupying octahedral and tetrahedral holes. For WH4 the W atoms are in a distorted fcc arrangement. As the number of hydrogens rises, the coordination of W by H increases correspondingly, leading to a twelve-coordinated W in WH6. In WH8 H-2 units also develop. All of the hydrides considered should be metallic at high pressure, though the Fermi levels of WH4 and WH6 lie in a deep pseudogap. Prodded by these theoretical studies, experiments were then undertaken to seek phases other than WH, exploring a variety of experimental conditions that would favor further reaction. Though a better preparation and characterization of WH resulted, no higher hydrides have as yet been found.

The first natural-occurring quasicrystal, icosahedrite, was recently discovered in the Khatyrka meteorite, a new CV3 carbonaceous chondrite. Its finding raised fundamental questions regarding the effects of pressure and temperature on the kinetic and thermodynamic stability of the quasicrystal structure relative to possible isochemical crystalline or amorphous phases. Although several studies showed the stability at ambient temperature of synthetic icosahedral AlCuFe up to similar to 35 GPa, the simultaneous effect of temperature and pressure relevant for the formation of icosahedrite has been never investigated so far. Here we present in situ synchrotron X-ray diffraction experiments on synthetic icosahedral AlCuFe using multianvil device to explore possible temperature-induced phase transformations at pressures of 5 GPa and temperature up to 1773 K. Results show the structural stability of i-AlCuFe phase with a negligible effect of pressure on the volumetric thermal expansion properties. In addition, the structural analysis of the recovered sample excludes the transformation of AlCuFe quasicrystalline phase to possible approximant phases, which is in contrast with previous predictions at ambient pressure. Results from this study extend our knowledge on the stability of icosahedral AlCuFe at higher temperature and pressure than previously examined, and provide a new constraint on the stability of icosahedrite.

We investigate the temperature and pressure dependences of the electrical resistivity, thermal conductivity and thermal diffusivity for bcc and hcp Fe using the low-order variational approximation and theoretical transport spectral functions calculated from the first-principles linear response linear-muffin-tin-orbital method in the generalized gradient approximation. The calculated values for the electrical resistivity show a strong increase with temperature and decrease with pressure, and are in agreement with high-temperature shock data. We also discuss the behavior of the electrical resistivity for the bcc -> hcp phase transition.

Three different sodium-silicon clathrate compounds-Na8Si46 (sI), Na24Si136 (sII), and a new structure, NaSi6-were obtained for the first time using high-pressure techniques. Experimental and theoretical results unambiguously indicate that Na-intercalated clathrates are only thermodynamically stable under high-pressure conditions. The sI clathrate can be synthesized directly from the elements at pressures from 2 to 6 GPa in the 900-1100 K range. Over the range of conditions studied, sII clathrate only forms as an intermediate compound prior to the crystallization of sI. At higher pressures, we observed the formation of a new intercalated compound, metallic NaSi6, which crystallizes in the orthorhombic Eu4Ga8Ge16 structure. High-pressure crystallization from Na-Si melts provides significant improvements in the electrical properties of bulk clathrate materials (residual resistance ratio RRR = 24 for sI and > 13 for NaSi6), compared to the typical characteristics achieved for single crystals obtained by conventional routes (RRR < 6). Since the Na-Si clathrates are stable only above 2 GPa, previous reports of their synthesis may be viewed as nonequilibrium, precursor-based routes to high-pressure phases at low-pressure conditions.

Diamond nanocrystals were synthesized catalyst-free from nano-porous carbon at high pressure and high temperature (HPHT). The synthesized nanocrystals have tunable diameters between 50 and 200 nm. The nanocrystals are dispersible in organic solvents such as acetone and are isotropic in nature as seen by dynamic light scattering.

We predict a tetragonal ground state for perovskite-structured PbCrO3 from density functional theory (DFT) + U calculations, and explain its anomalously large volume. The predicted structure is stabilized due to orbital ordering of Cr d in the presence of a large tetragonal crystal field, mainly due to off-centering of the Pb atom. At higher pressures (smaller volumes) there is a first-order transition to a cubic phase where the Cr-d orbitals are orbitally liquid. This phase transition is accompanied by a similar to 11.5% volume collapse, one of the largest known for transition-metal oxides. The large ferroelasticity and its strong coupling to the orbital degrees of freedom could be exploited to form potentially useful magnetostrictive materials.

The high-pressure and high-temperature formation and stability of recently discovered magnesium carbide Mg2C were studied by in situ X-ray diffraction up to 20 GPa and 1550 K. The insights into the thermodynamics of Mg2C under extreme conditions, and its metastability at 0.1 MPa and 300 K, were provided by ab initio calculations of total energies and phonon density of states as a function of pressure. We illustrate how the compound found occasionally in high-pressure experiments could be systematically predicted and discovered in a time-saving way. Similar theoretical approaches can be useful for prediction of synthesis conditions and recovery of new solids.