Ferroelectric perovskite oxides possess a large electrocaloric (EC) effect, but usually at high temperatures near the ferroelectric/paraelectric phase transition temperature, which limits their potential application as next generation solid-state cooling devices. We use classical molecular dynamics to study the electric-field-induced phase transitions and EC effect in PMN-PT (PbMg1/3Nb2/3O3-PbTiO3). We find that the maximum EC strength of PMN-PT occurs within the morphotropic phase boundary (MPB) region at 300 K. The large adiabatic temperature change is caused by easy rotation of polarization within the MPB region.

We report Hugoniot measurements on a mixture of cubic boron nitride (cBN) and hexagonal boron nitride (hBN, similar to 10% in weight) to investigate the shock compression behavior of BN at Hugoniot stresses up to 110 GPa. We observed a discontinuity at similar to 77 GPa along the Hugoniot and interpreted it as the manifestation of the shock-induced phase transition of hBN to cBN. The experimental stress at 77-110 GPa shows significant deviation from the hydrodynamic Hugoniot of cBN calculated using the Mie-Gruneisen model coupled with the reported 300 K-isotherms of cBN. Our investigation reveals that material strength in cBN increases with the experimental stress at least up to 110 GPa. The material strength might be preserved at higher stress if we consider the previously reported high stress data. Published by AIP Publishing.

The optical and electronic properties of semiconducting materials are of great importance to a vast range of contemporary technologies. Diamond-cubic germanium is a well-known semiconductor, although other 'exotic' forms may possess distinct properties. In particular, there is currently no consensus for the band gap and electronic structure of ST12-Ge (tP12, P4(3)2(1)2) due to experimental limitations in sample preparation and varying theoretical predictions. Here we report clear experimental and theoretical evidence for the intrinsic properties of ST12-Ge, including the first optical measurements on bulk samples. Phase-pure bulk samples of ST12-Ge were synthesized, and the structure and purity were verified using powder X-ray diffraction, transmission electron microscopy, Raman and wavelength/energy dispersive X-ray spectroscopy. Optical measurements indicate that ST12-Ge is a semiconductor with an indirect band gap of 0.59 eV and a direct optical transition at 0.74 eV, which is in good agreement with electrical transport measurements and our first-principles calculations.

Performing well-controlled metal-silicate partitioning experiments at conditions directly simulating those of a deep magma ocean is difficult. It is therefore common to perform experiments at lower pressures and temperatures, which are used to determine the effects of salient variables. Often, these effects are determined by multiple linear regression of a data set covering a large range of P-T-composition space. In particular, these data sets often contain the results of experiments performed both with and without sulfur in the system. Data are often regYressed, however, using a relationship based only upon the formation of oxide species in the silicate melt. Several studies have suggested that when sulfur is present in the system, siderophile trace metals may also dissolve into silicate melt as S-bearing species. We have derived a relationship for regressing experimental metal-silicate partitioning data that considers the formation of both oxide and sulfide species in the silicate melt. Using model data sets, we have assessed the ability of this relationship, and the more typical single-species relationship, to accurately parameterize data in which the formation of S-bearing species is important. We have also applied this new relationship to experimental results on the metal-silicate partitioning of gold and find it is able to reconcile the conflicting pressure dependencies of lnD(Au)(met/sil) found in previous studies.

Black phosphorus (BP) has recently attracted significant attention due to its exceptional physical properties. Currently, high-quality few-layer and thin-film BP are produced primarily by mechanical exfoliation, limiting their potential in future applications. Here, the synthesis of highly crystalline thin-film BP on 5 mm sapphire substrates by conversion from red to black phosphorus at 700 degrees C and 1.5 GPa is demonstrated. The synthesized approximate to 50 nm thick BP thin films are polycrystalline with a crystal domain size ranging from 40 to 70 mu m long, as indicated by Raman mapping and infrared extinction spectroscopy. At room temperature, field-effect mobility of the synthesized BP thin film is found to be around 160 cm(2) V-1 s(-1) along armchair direction and reaches up to about 200 cm(2) V-1 s(-1) at around 90 K. Moreover, red phosphorus (RP) covered by exfoliated hexagonal boron nitride (hBN) before conversion shows atomically sharp hBN/BP interface and perfectly layered BP after the conversion. This demonstration represents a critical step toward the future realization of large scale, high-quality BP devices and circuits.

We study the electrocaloric effect in the classic ferroelectric BaTiO3 through a series of phase transitions driven by applied electric field and temperature. We find both negative and positive electrocaloric effects, with the negative electrocaloric effect, where temperature decreases with applied field, in monoclinic phases. Macroscopic polarization rotation is evident through the monoclinic and orthorhombic phases under applied field, and is responsible for the negative electrocaloric effect.

Hydrogen has been considered as an important candidate of light elements in the Earth's core. Because iron hydrides are unquenchable, hydrogen content is usually estimated from in situ X-ray diffraction measurements that assume the following linear relation: x = (V-FeHx - V-Fe)/Delta V-H, where x is the hydrogen content, Delta V-H is the volume expansion caused by unit concentration of hydrogen, and V-FeHx and V-Fe are volumes of FeHx and pure iron, respectively. To verify the linear relationship, we computed the equation of states of hexagonal iron with interstitial hydrogen by using the Korringa-Kohn-Rostoker method with the coherent potential approximation (KKR-CPA). The results indicate a discontinuous volume change at the magnetic transition and almost no compositional (x) dependence in the ferromagnetic phase at 20 GPa, whereas the linearity is confirmed in the non-magnetic phase. In addition to their effect on the density-composition relationship in the Fe-FeHx system, which is important for estimating the hydrogen incorporation in planetary cores, the magnetism and interstitial hydrogen also affect the electrical resistivity of FeHx. The thermal conductivity can be calculated from the electrical resistivity by using the Wiedemann-Franz law, which is a critical parameter for modeling the thermal evolution of the Earth. Assuming an Fe1-ySiyHx ternary outer core model (0.0 <= x <= 0.7), we calculated the thermal conductivity and the age of the inner core. The resultant thermal conductivity is similar to 100 W/m/K and the maximum inner core age ranges from 0.49 to 0.86 Gyr.

Dicyanoacetylene (C4N2) is an unusual energetic molecule with alternating triple and single bonds (think miniature, nitrogen-capped carbyne), which represents an interesting starting point for the transformation into extended carbon nitrogen solids. While pressure-induced polymerization has been documented for a wide variety of related molecular solids, precise mechanistic details of reaction pathways are often poorly understood and the characterization of recovered products is typically incomplete. Here, we study the highpressure behavior of C4N2 and demonstrate polymerization into a disordered carbon nitrogen network that is recoverable to ambient conditions. The reaction proceeds via activation of linear molecules into buckled molecular chains, which spontaneously assemble into a polycyclic network that lacks long-range order. The recovered product was characterized using a variety of optical spectroscopies, X-ray methods, and theoretical simulations and is described as a predominately sp(2) network comprising "pyrrolic" and "pyridinic" rings with an overall tendency toward a two-dimensional structure. This understanding offers valuable mechanistic insights into design guidelines for next-generation carbon nitride materials with unique structures and compositions.

Silica phases, SiO2, have attracted significant attention as important phases in the fields of condensed-matter physics, materials science, and (in view of their abundance in the Earth's crust) geoscience. Here, we experimentally and theoretically demonstrate that coesite undergoes structural modulations under high pressure. Coesite transforms to a distorted modulated structure, coesite-II, at 22-25 GPa with modulation wave vector q = 0.5b*. Coesite-II displays further commensurate modulation along the y axis at 36-40 GPa and the long-range ordered crystalline structure collapses beyond similar to 40 GPa and starts amorphizing. First-principles calculations illuminate the nature of the modulated phase transitions of coesite and elucidate the modulated structures of coesite caused by modulations along the y-axis direction. The structural modulations are demonstrated to result from phonon instability, preceding pressured-induced amorphization. The recovered sample after decompression develops a rim of crystalline coesite structure, but its interior remains low crystalline or partially amorphous. Our results not only clarify that the pressure-induced reversible phase transitions and amorphization in coesite originate from structural modulations along the y-axis direction, but also shed light on the densification mechanism of silica under high pressure.

We provide a fundamental insight into the microscopic mechanisms of the aging processes. Using large-scale molecular dynamics simulations of the prototypical ferroelectric material PbTiO3, we demonstrate that the experimentally observed aging phenomena can be reproduced from intrinsic interactions of defect dipoles related to dopant-vacancy associates, even in the absence of extrinsic effects. We show that variation of the dopant concentration modifies the material's hysteretic response. We identify a universal method to reduce loss and tune the electromechanical properties of inexpensive ceramics for efficient technologies.